Customization: | Available |
---|---|
Output Type: | Single |
Warranty: | 2 Years |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
MODEL | D-30A | D-30B | |
DC VOLTAGE | 5V 12V | 5V 24V | |
RATED CURRENT | 4A 1A | 2.2A 1A | |
CURRENT RANGE | 0.5 ~ 4A 0.1 ~ 1A | 0.5 ~ 4A 0.1 ~ 1A | |
RATED POWER | 32W | 35W | |
OUTPUT | RIPPLE & NOISE (max.) Note.2 | 50mVp-p 100mVp-p | 50mVp-p 100mVp-p |
VOLTAGE ADJ. RANGE | CH1 : 4.75 ~ 5.5V | CH1 : 4.75 ~ 5.5V | |
VOLTAGE TOLERANCE Note.3 | ±2.0% + 3,-7% | ±2% + 3,-5% | |
LINE REGULATION | ±0.5% ±1.0% | ±0.5% ±1.0% | |
LOAD REGULATION | 0.045 | ±0.5% ±4.0% | |
SETUP, RISE, HOLD TIME | 200ms, 50ms, 30ms at full load | ||
VOLTAGE RANGE | 85 ~ 132VAC / 170 ~ 264VAC selected by switch 240 ~ 370VDC | ||
FREQUENCY RANGE | 47 ~63Hz | ||
INPUT | EFFICIENCY(Typ.) | 72% 74% | |
AC CURRENT | 0.8A/115VAC 0.45A/230VAC | ||
INRUSH CURRENT(max.) | COLD START 18A/115VAC 36A/230VAC | ||
LEAKAGE CURRENT | <1mA/ 240VAC | ||
OVER LOAD | 105 ~ 150% rated output power | ||
PROTECTION | Protection type : Fold back current limiting, recovers automatically after fault condition is removed. | ||
WORKING TEMP. | -10 ~ +60°C (Refer to output load derating curve) | ||
WORKING HUMIDITY | 20 ~ 90% RH non-condensing | ||
ENVIRONMENT | STORAGE TEMP., HUMIDITY | -20 ~ +85°C, 10 ~ 95% RH | |
TEMP. COEFFICIENT | +0.03%/°C (0 ~ 50°C) | ||
VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes | ||
SAFETY STANDARDS | Design refer to UL1012 | ||
SAFETY & | WITHSTAND VOLTAGE | I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | |
EMC | ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC | |
EMI CONDUCTION & RADIATION | Design refer to FCC Part15 J Conduction | ||
MTBF | 417.6K hrs min. MIL-HDBK-217F (25°C) | ||
OTHERS | DIMENSION | 129*98*38mm (L*W*H) | |
PACKING | 0.41 Kg; 30pcs/16Kg/0.86CUFT | ||
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. | |||
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. | |||
3. Tolerance : includes set up tolerance, line regulation and load regulation. | |||
NOTE |